Categories

System glitches and false alarms can be aggravating, and even more concerning, may prevent your home’s security from working the way it should. Fortunately, most issues, from dead batteries to false alarms, are simple to correct. Explore our recommendations for troubleshooting your home alarm system in Worcester. We’ll help keep your family safeguarded and your system running smoothly.

Test Your Home Security System In Worcester

One great way to troubleshoot your property’s defense is to test it yourself! Modern systems let you put them in test mode to prevent you from prompting an emergency response. After switching to test mode, follow these steps:

• Arm your system as you typically would when heading out.
• Open a door or window that uses a contact sensor, or try to trigger another sensor. Close the window or door once you’re finished so it doesn’t prompt the alarm as you switch the system back on.
• Permit the alarm to sound for 60 seconds to ensure communications with the security provider and to make an entry in the alarm system log.
• Proceed to test devices as needed
• Inspect the alarm’s activity log to verify functionality.

Don’t worry, monitoring specialists will be aware that your alarm system is being tested. Just be sure to switch out of test mode when complete. It’s smart to test monthly or whenever you make changes to your home’s phone or internet connectivity.

Check The Position And State Of Motion Sensors

Although an integral part of your alarm system, motion sensors are notorious for false alarms. Do your part to prevent them with a few basic troubleshooting steps.

• Conduct a physical check. Is there anything that could shift within the path of the sensor, like drapery caught in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can lead to malfunctions. Make sure the face is clean.
• Does the motion detector come with pet immunity you can enable? Some models can be set to disregard pets weighing up to 100 pounds.
• When was the battery replaced? Low batteries can impact performance or lead to false alarms.
• Is a heat source impacting the sensor? Excess heat from direct sun or a fireplace can trigger an alarm.

Keep Batteries Ready And Watch Out For Low Battery Signals

One helpful perk of modern home security systems is that they’ll alert you when batteries are dying. If your system is equipped with a control panel or app, you’ll typically see notifications there. Depending on your system, you may detect an occasional beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that will have to be replaced every so often. It’s wise to keep batteries around and create a replacement schedule. Some systems also include a rechargeable backup battery for the main control panel. This backup battery keeps your system operating if you lose power and should charge back up once power is back online. If it fails to recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Worcester 

As the foremost name in home security, ADT builds systems that provide unsurpassed functionality and protection. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always get updates when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Worcester home and family. Place a call to (508) 283-7533 or complete our form today!